Differences

This shows you the differences between two versions of the page.

--- about:svc:3d_scanning [2026/09/25 03:25] – ↷ Page moved from svc:3d_scanning to about:svc:3d_scanning admin
+++ about:svc:3d_scanning [2026/11/06 17:03] (current) – robertk
@@ Line 5: / Line 5: @@
 ==== Laser Scanning ====
-Laser scanning uses the distortion of laser lines to reconstruct and object. This technology is accurate down to a maximum resolution of 0.02mm. This method is limited by the use of markers to keep the scan aligned and takes more planning to get a quality model. This process is great for small to medium sized parts that require high precision.
+Laser scanning uses the distortion of laser lines to reconstruct and object. This technology and my hardware is accurate down to a maximum resolution of 0.02mm. This method is limited by the use of markers to keep the scan aligned and takes more planning to get a quality model. This process is great for small to medium sized parts that require high precision.
 ==== NIR Scanning ====
@@ Line 16: / Line 16: @@
 ===== Tools =====
+{{topic>3d_scanning&list&nodate&nouser}}
-  * CR-Scan Raptor Hybrid Scanner: NIR + Laser Scanning
+{{tag>services secondary}}
-  * Cannon D1: Photogrammetry camera
-  * Metashape: Photogrammetry software
-  * Godox R200 flash w/ polarizer: Photogrammetry flash

FTG Wiki