Differences

This shows you the differences between two versions of the page.

--- about:svc:reverse_engineering [2026/09/25 03:25] – ↷ Page moved from svc:reverse_engineering to about:svc:reverse_engineering admin
+++ about:svc:reverse_engineering [2026/09/25 03:25] (current) – ↷ Links adapted because of a move operation admin
@@ Line 3: / Line 3: @@
 ===== About =====
-Combining my [[svc:cad|CAD Modeling]], [[svc:3d_scanning|3D Scanning]], and metrology tool sets, I can recreate solid models of existing hardware. If you need to recreate a part that already exists, but you don't have an existing CAD model or drawings, I can generate an accurate CAD model and drawings for you.
+Combining my [[about:svc:cad|CAD Modeling]], [[about:svc:3d_scanning|3D Scanning]], and metrology tool sets, I can recreate solid models of existing hardware. If you need to recreate a part that already exists, but you don't have an existing CAD model or drawings, I can generate an accurate CAD model and drawings for you.
 ===== Tools =====

FTG Wiki