Differences

This shows you the differences between two versions of the page.

--- kb:hardware:elegoo_satrun_3_ultra [2025/04/22] – created robertkuyper
+++ kb:hardware:elegoo_satrun_3_ultra [2025/04/22] (current) – robertkuyper
@@ Line 7: / Line 7: @@
 ^ Resolution | 12k |
 ^ Print Volume | ~7L |
-^ Print Constraints | 218.88mm(L),122.88mm(W),260mm(H)|
+^ Axis Limits | 218.88mm(x),122.88mm(y),260mm(z)|
 ^ Z-axis resolution | 0.01mm |
 ^ X-Y resolution | 19x24μm(11520x5120)|
+===== Machines =====
+==== Printer 4 ====
+^ Firmware | V1.5.4 |
+This is just a standard Saturn 3 Ultra. The only modification is a 3d printed bracket to drain resin off of the build plate after printing.
 ===== Manuals =====
 {{ :kb:manuals:elegoo_saturn_3_ultra_manual.pdf | User Manual }}

FTG Wiki