Differences

This shows you the differences between two versions of the page.

--- kb:proj:blw:joystick_repair:start [2026/11/07 11:23] – ↷ Page moved and renamed from kb:proj:blw:joystick_repair to kb:proj:blw:joystick_repair:start robertk
+++ kb:proj:blw:joystick_repair:start [2026/11/07 13:52] (current) – robertk
@@ Line 12: / Line 12: @@
 ===== About =====
-This part repaired an important piece of equipment for [[kb:customers:bush_landworks|Bush Landworks]]. A small plastic part inside the joystick of their Woodmizer LT70 broke. This is their primary piece of equipment and their production decreased significantly because the emergency repair make positioning the cutting head very difficult. Woodmizer does not provide a replacement for the individual part and replacing the entire joystick was going to cost ~$1000 and the lost production while waiting for and replacing the joystick. I was able to get them a printed replacement the next day and at 1/50th the cost.
+This part repaired an important piece of equipment for [[..:start|Bush Landworks]]. A small plastic part inside the joystick of their Woodmizer LT70 broke. This is their primary piece of equipment and their production decreased significantly because the emergency repair make positioning the cutting head very difficult. Woodmizer does not provide a replacement for the individual part and replacing the entire joystick was going to cost ~$1000 and the lost production while waiting for and replacing the joystick. I was able to get them a printed replacement the next day and at 1/50th the cost.
 ===== Design Process =====
@@ Line 22: / Line 22: @@
 [[https://grabcad.com/library/joystick-direction-shim-1|GrabCAD Model]]
-{{tag>projects rev_eng}}
+{{tag>projects rev_eng 3d_printing}}

FTG Wiki

User Tools

Site Tools

Differences

Page Tools