Differences

This shows you the differences between two versions of the page.

--- kb:proj:ftg:auto_printer [2026/09/24 04:02] – robertk
+++ kb:proj:ftg:auto_printer [2026/09/24 04:03] (current) – robertk
@@ Line 5: / Line 5: @@
 ===== About =====
-The goal of this project was to create an automated FDM 3D printing setup. It was based on a Prusa i3 MK3S+ printer. Initially, I had planned on starting a print farm, but after some market analysis found that wouldn't be a good use of my time. I still built out an automated printer to learn more about 3D printing technology and firmware.
+The goal of this project was to create an automated FDM 3D printing setup. It was based on a Prusa i3 MK3S+ printer. Initially, I had planned on starting a print farm, but after some market research I found that wouldn't be a good use of my time. I still built out an automated printer to learn more about 3D printing technology and firmware.
 To make the Prusa print and eject parts I developed a system with 4 basic parts:

FTG Wiki