Differences

This shows you the differences between two versions of the page.

--- kb:proj:stintzi:paddle_tail:start [2026/11/07 11:25] – ↷ Page moved and renamed from kb:proj:stintzi:paddle_tail to kb:proj:stintzi:paddle_tail:start robertk
+++ kb:proj:stintzi:paddle_tail:start [2026/11/07 11:46] (current) – robertk
@@ Line 1: / Line 1: @@
 ====== Paddle Tail Swim Bait ======
-{{tag>projects mold_making}}
+====== About ======
+The goal of this project was to create a custom swim bait approximately twelve inches long. I worked with Aaron Stintzi to design the bait. We settled on creating a silicone skin mold with a 3D printed shell to provide extra rigidity. The plug for the mold was printed on my [[..:..:..:hw:elagoo:saturn_3_ultra:start|Saturn 3 Ultra]] and the shell was printed on my [[..:..:..:hw:qidi:xmax3:start|Qidi X-MAX3]]. To ensure the silicone cured properly the plug was sprayed with a thin clear coat. Theoretically tin-cure silicon is not inhibited by UV cure resins, but because perfect dimensional accuracy was not necessary and I was using a significant amount of silicon, I decided on the lacquer to ensure no adverse reaction.
+The shell also acted as the outer form for the mold. I glued 10 gauge copper wire between the plug and top surface of the shell to act as air vents in places I thought the plastic would flow poorly or bubbles would be likely to be trapped. The mold was poured in Smooth-On Mold Max 40 degassed in a vacuum chamber. The bait itself was cast from Plastisol (PVC).
+====== Gallery ======
+{{tag>projects mold_making 3d_printing}}

FTG Wiki

User Tools

Site Tools

Differences

Page Tools