Differences

This shows you the differences between two versions of the page.

--- services:3d_scanning [2025/04/21] – created robertkuyper
+++ services:3d_scanning [2025/04/24] (current) – robertkuyper
@@ Line 28: / Line 28: @@
 ==== Reverse Engineering ====
-Using 3D scans provides a really good baseline for reverse engineering parts. It is especially useful when there are large curved surfaces or several angled faces that are hard to measure conventionally.
+D scans provide a really good baseline for [[services:prototyping#reverse_engineering|reverse engineering]] parts. It is especially useful when there are large curved surfaces or several angled faces that are hard to measure conventionally.
 ===== Tools =====
-  * [[kb:tools:creality_raptor|CR-Scan Raptor]] Hybrid Scanner: NIR + Laser Scanning
+  * [[kb:hardware:canon_ds126221|Cannon D1]]: Photogrammetry camera
-  * [[kb:tools:canon_ds126221|Cannon D1]]: Photogrammetry camera
+  * [[kb:hardware:creality_raptor|CR-Scan Raptor]] Hybrid Scanner: NIR + Laser Scanning
+  * [[kb:hardware:godox_ar400|Godox AR400]] flash w/ polarizer: Photogrammetry flash
   * [[kb:software:metashape|Metashape]]: Photogrammetry software
-  * [[kb:tools:godox_ar400|Godox AR400]] flash w/ polarizer: Photogrammetry flash

FTG Wiki