Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| services:3d_scanning [2025/04/21] – robertkuyper | services:3d_scanning [2025/04/24] (current) – robertkuyper |
|---|
| ==== Reverse Engineering ==== | ==== Reverse Engineering ==== |
| |
| Using 3D scans provides a really good baseline for reverse engineering parts. It is especially useful when there are large curved surfaces or several angled faces that are hard to measure conventionally. | 3D scans provide a really good baseline for [[services:prototyping#reverse_engineering|reverse engineering]] parts. It is especially useful when there are large curved surfaces or several angled faces that are hard to measure conventionally. |
| |
| ===== Tools ===== | ===== Tools ===== |
| |
| * [[kb:hardwear:canon_ds126221|Cannon D1]]: Photogrammetry camera | * [[kb:hardware:canon_ds126221|Cannon D1]]: Photogrammetry camera |
| * [[kb:hardwear:creality_raptor|CR-Scan Raptor]] Hybrid Scanner: NIR + Laser Scanning | * [[kb:hardware:creality_raptor|CR-Scan Raptor]] Hybrid Scanner: NIR + Laser Scanning |
| * [[kb:hardwear:godox_ar400|Godox AR400]] flash w/ polarizer: Photogrammetry flash | * [[kb:hardware:godox_ar400|Godox AR400]] flash w/ polarizer: Photogrammetry flash |
| * [[kb:software:metashape|Metashape]]: Photogrammetry software | * [[kb:software:metashape|Metashape]]: Photogrammetry software |
| |
