FTG Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== PLA ======

===== About =====

Polylactic acid [PLA] is a thermoplastic commonly used in 3D printing. It has low printing temperatures and one of the best native strenths while sacrificing rigidity and being fairly brittle. PLA is only suitable for low temperature applications because the glass transition temperature is between 60 and 65°C.

I primarily use PLA for quick prototypes because it is cheap, prints well at high extrusion volumes, and has a wide variety of colors.

===== Vendors =====

  * [[kb:vendors:atomic_filament|Atomic Filament]]

===== Filaments on Hand =====

  * [[https://atomicfilament.com/products/bright-white-pla-filament|White: 1kg/roll]]
  * [[https://atomicfilament.com/products/3-5kg-meltmiser-white-pla-filament|Economy White: 3kg/roll]]
  * [[https://atomicfilament.com/products/extreme-jet-black-pla-filament|Black: 1kg/roll]]
  * [[https://atomicfilament.com/products/gun-metal-gray-pla-filament|Gun Metal Gray: 1kg/roll]]
  * [[https://atomicfilament.com/products/perfect-orange-pla-filament|Orange: 1kg/roll]]

FTG Wiki

User Tools

Site Tools

Page Tools