FTG Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Robodrill Cobot Tending ======

===== About =====

This was my primary responsibility for 5 years at my previous employer. It began when they bought a complete robot integration for the first robodrill. I was tasked with copying the installation across several different models of robodrill for a total of 5 installations. I started by diagramming the electronic and pneumatic systems as well as gathering specifications for each component. I copied the design of the table and subcontracted it to a local fabricator. The actual design, acquisition, and installation only took a few months, but I continued to maintain and program the setups for new projects for the remainder of my time there.

===== Gallery =====

Unfortunately, I have no pictures of the installation without parts in them that would violate the NDAs with the companies we were contracted to. I am including images of the CAD models we based the installation on. 

===== Lessons Learned =====

  * don't be afraid to change things even when you were tasked with copying something
  * having robots of multiple generations massively increases the programming overhead
  * spec. rounded corners on tables, working around a cobot is pretty safe unless you smash into a pointed corner
  * cobots have a lot of precision but looser clearances are desirable where possible to allow for easier setup
  * vises should have sensors for position so that you can detect dropped material
  * sensors are more reliable than operator input
  * offline programming is much more efficient than programming on the robots


{{tag>projects automation rev_eng}}
FTG Wiki

User Tools

Site Tools

Page Tools
