FullTiltWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CAD Modeling ======

===== About =====
I can help you develop CAD models based on anything that you would like to make. I specialize in making models that take into account the tooling that will be made to manufacture the product. Not only can I help you create parts that meet your mechanical and aesthetic requirements, I can optimize the geometry to be cost effective to make.

I have the most experience with Fusion 360, but am also familiar Solidworks, and OpenSCAD. I can provide solid or surface models in a wide variety of formats depending on your needs. I can also provide models that are parametric.

Examples of my CAD work can be found on [[https://grabcad.com/robert.kuyper-1|GrabCAD]].

===== Tools =====

  * [[kb:software:fusion_360|Fusion 360]]
  * [[kb:software:freecad|FreeCAD]]
  * [[kb:software:openscad|OpenSCAD]]
  * [[kb:software:solidworks|SolidWorks]]

===== Relevant Projects =====

  * [[projects:bush_landworks:joystick_repair|Joystick Repair]]
  * [[projects:stintzi_baits:paddle_tail_swim_bait|Paddle Tail Swim Bait]]
  * [[projects:in_house:ornithoid_mechanism|Ornithoid Mechanism]]


===== Terminology =====

  * CAD: Computer Aided Modeling is the use of computers to create, modify, or analyze a part.
  * Solid Model: a digital representation of an object that understands that the volume of a part is filled. These types of models are often used for engineering analysis like Finite Element Analysis.
  * Surface Model: a digital representation of an object made up of surfaces that understand the inside and outside of a face but not that the part is filled.
  * Parametric Models: a model that has a table of values that can be changed to dynamically change the part. If you want to offer two sizes of a part or a varying number of holes, this can often be generated with a parametric model.


As long as the surface model has no holes or overlapping geometry, it will typically be interchangeable with a solid model. Solid models enure that there are no holes or overlapping geometry in a generated mesh.
FullTiltWiki

User Tools

Site Tools

Page Tools
