====== Printer 3 ======

<note warning>
This printer is being modified back to its factory configuration, but is still currently functional.
</note>


===== About =====

^ Make | Prusa |
^ Model | i3 |
^ Revision | [[kb:hardware:prusa_i3_mk3s_plus|MK3S+]] |
^ Firmware | V3.14.1 |

This printer is equipped with a custom heated chamber and upgraded nylon parts. I also moved the electronics (other than the steppers) out of the enclosure. This chamber supports up to 80C, but to prevent the steppers from overheating I do not exceed 60C. This printer is being retired from the chamber and returned to factory configuration. All future high temperature prints will be done on the QIDI printers.