====== Air Vise Reverse Engineering ======

===== About =====

The purpose of this project was to get an accurate internal model for an [[https://www.airvise.com/|Air Vise]] so that we could add sensors to it. Because the sensors would require drilling and tapping holes, we wanted to get a better idea of where was safe to drill. I ended up leaving before we actually modified any vises. I also uploaded a simplified model to GrabCAD with the internals removed so that it could be imported into CAM setups.

===== Links =====

  * [[https://grabcad.com/library/airvise-4inch-1|GrabCAD]]

===== Gallery =====

{{tag>projects rev_eng}}