| Make | QIDI |
|---|---|
| Model | Plus 4 |
| Print Volume | ~26L |
| Axis Limits | 305mm(x),305mm(y),280mm(z) |
| Z-Axis Resolution | 0.01mm |
| Layer Height (min) | 0.15mm(first layer), 0.1mm |
| Chamber Temperature (max) | 65℃ |
| Bed Temperature (max) | 120℃ |
| Nozzle Temperature (max) | 370℃ |
| Firmware | ? |
|---|
This is a standard Plus 4 with a smooth build plate.