kb:hardware:elegoo_satrun_3_ultra
Table of Contents
Elegoo Saturn 3 Ultra
About
| Make | Elegoo |
|---|---|
| Model | Saturn 3 Ultra |
| Resolution | 12k |
| Print Volume | ~7L |
| Axis Limits | 218.88mm(x),122.88mm(y),260mm(z) |
| Z-axis resolution | 0.01mm |
| X-Y resolution | 19×24μm(11520×5120) |
Machines
Printer 4
| Firmware | V1.5.4 |
|---|
This is just a standard Saturn 3 Ultra. The only modification is a 3d printed bracket to drain resin off of the build plate after printing.
Manuals
kb/hardware/elegoo_satrun_3_ultra.txt · Last modified: 2025/04/22 by robertkuyper
