kb:materials:pourables:silicone:mold_max_40
This is an old revision of the document!
Table of Contents
Mold Max 40
About
Mold Max 40 is a tin-cure silicone provided by Smooth-On.
Detail
| Detail | Specification |
|---|---|
| Mix Ratio (by weight) | 100A:10B |
| Pot Life | 45min |
| Cure Time | 24hr |
| Mixed Viscosity | 45,000 cps |
| Shore Hardness | 40 A |
| Specific Gravity | 1.14 |
| Color | Mint Green |
| Tensile Strength | 550psi |
| Elongation @ Break | 250% |
| Max Temperature | 400 °F |
| Min Temperature | -65 °F |
Mixing
Mold Max 40 should be mixed at 100A:10B by weight and degassed before pouring.
Experience
The pot time is a bit of a theoretical number. This material begins thickening immediately and remains “pourable” for about 40 minutes depending on ambient temperature. Pouring becomes more difficult as time goes on because of the thickening. My suggestion would be degassing for no more than 20 minutes and pouring in about 5 minutes. At the 30 minute mark, which is the listed pot time, the silicone is already noticeably thicker and harder to pour without trapping bubbles.
Documents
Links
kb/materials/pourables/silicone/mold_max_40.1746116721.txt.gz · Last modified: 2025/05/01 by robertkuyper
